Products :: Welding machines :: AUTOMIG

Automig
Step-regulated MIG/MAG

Automig is a complete range of mobile, stepregula-ted MIG/MAG welding machines for professional sheet-metal welding.Rally MIG 160, the smallest “member of the family” (without spot and interval facilities and with four adjustment steps), is only available as a mono-phase machine. The other Automig machines with respective maximum out-puts of 180, 200 and 250 A, are available as both mono-phase and three-phase machines.

From 230 to 400 V
The operating range of the machines is reflected in the fact that several of the Automigs are switchable from 230 to 400 V, have many adjustment steps, spot and interval facilities, four-stroke and the possibility of adjustment of wire-feed speed from the torch handle.

All the varieties of Automig have excellent welding properties in the dip-transfer area using either CO² or mixed gas. Automig is available with an outlet for electric tools and a wide range of accessories for body work.


MACHINE PROFILE	/METALS
Steel	***
Aluminium	**
Stainless	*


MACHINE TYPE	Automig 181	Automig 183	Automig 223
Mains voltage	1 x 230 V	3 x 230 V/ 400 V	3 x 230 V/ 400 V
Current range	30 - 160A	20 - 180 A	20 - 200 A


MACHINE TYPE	Automig 231	Automig 271	Automig 273
Mains voltage	1 x 230 V	1 x 230 V	3 x 400 V
Current range	20 - 200 A	20 - 250 A	20-250 A


MACHINE TYPE	Multimotive 220	Multimotive 220 DUO
Mains voltage	3 x 400 V	3 x 400 V
Current range	20 - 200 A	20 - 200 A

Machine profile

*** Excellent
The welding machine is primarly designed and optimised for welding in this material.

** Good
The welding machine is secondarily designed for welding in this material.

* Applicable
The welding machine is applicable for simple welding operations using this material.

MIG brazing
Multimotive 220 is design-ed specifically for the gentle MIG brazing pro-cess used for galvanised and primed plates in the continuously more com-plex steel alloys.But Multi-motive 220 is also an all-round machine featuring 20 voltage steps and spot and interval facilities sui-table for MIG brazing steel and high-tensile steel. A special choke with two out-lets makes it easy to switch between the brazing and weld-ing processes.

Multimotive DUO
At the request of the automotive trade, Miga-tronic has developed Multimotive DUO with two welding outlets. A configu-ration for two wires, e.g. a MIG braze-wire on one coil and a mild solid wire, alu-minium or stainless on the other, increases the machine’s flexibility. Switching between the two torches is done using the function switch on the con-trol panel.

Download Automig leaflet here

Download Multimotive leaflet here

AutomigStep-regulated MIG/MAG

Automig
Step-regulated MIG/MAG